Ankr-TITE® Wedge Anchor — Zinc-Plated Carbon Steel
- Provides precise, rapid expansion
- Enlarged 3 dimple clip
- Length identification code stamped on each anchor
Original Wej-It® Wedge Anchor
- Use for light to normal weight concrete and solid masonry
- Guiding notch on the anchor head
- Minimize wedge loosening under vibratory load
Sleeve-TITE™ Sleeve Anchor — Zinc-Plated Carbon Steel
- From lightweight concrete and hollow masonry to normal weight concrete and solid masonry applications
TOGGLER® Specialty Anchors — Wire Shelf
- Includes a locking retainer clip so shelves don't tip, even with uneven loads
- Ideal for use with shelving systems like ClosetMaid®
- Perfect for closet systems and kitchen, garage or workshop shelves
TOGGLER® Specialty Anchors — Shelving Anchor
- Built-in spacer prevents the anchor from being jacked out of the wall during installation
- Can be used on warm or wet walls when ventilation is needed behind the installed object
Ankr-TITE® Wedge Anchor — Hot-Dip Galvanized Steel with 304 SS Clip
- Provides precise, rapid expansion
- Enlarged 3 dimple clip
- Length identification code stamped on each anchor
Ankr-TITE® Wedge Anchor — 304 Stainless Steel
- Provides precise, rapid expansion
- Enlarged 3 dimple clip
- Length identification code stamped on each anchor
Ankr-TITE® Wedge Anchor — 316 Stainless Steel
- Provides precise, rapid expansion
- Enlarged 3 dimple clip
- Length identification code stamped on each anchor
Sleeve-TITE™ Sleeve Anchor — 304 Stainless Steel
- From lightweight concrete and hollow masonry to normal weight concrete and solid masonry applications
- Sleeve-TITE® Sleeve Anchor
POWER-Skru™ Large Diameter Concrete Screw
- Heat treatment provides surface and core hardness
- Serrated head facilitates a positive lock
- Can be removed and reinstalled
Wej-Con® Concrete Screw — Heat-Treated Carbon Steel with Blue R-Blocker Coating
- Cuts threads in structural material
- Surface coating for corrosion resistance
- Drill bit included in each box
Wej-Con® Concrete Screw — 410 Stainless Steel with Silver R-Blocker Coating
- Cuts threads in structural material
- Surface coating for corrosion resistance
- Drill bit included in each box
Hang-TITE™ Rod Hanger Screw — Wood applications
- For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
Hang-TITE™ Rod Hanger Screw — Steel applications
- For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
Hang-TITE™ Rod Hanger Screw — Concrete applications
- For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
Hang-TITE™ Rod Hanger Screw — Installation Tool
- For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
Ultra-Drop™ Drop-In Anchor — Zinc-Plated Carbon Steel
- Easy to install
- Offers consistent holding power in shallow embedment
- Eliminates requirement for rod couplings
Ultra-Drop™ Drop-In Anchor — Type 304 Stainless
- Easy to install
- Offers consistent holding power in shallow embedment
- Eliminates requirement for rod couplings
Ultra-Drop™ Drop-In Anchor — Type 316 Stainless
- Easy to install
- Offers consistent holding power in shallow embedment
- Eliminates requirement for rod couplings
Ultra-Drop™ Drop-In Anchor — Setting Tools
- Easy to install
- Offers consistent holding power in shallow embedment
- Eliminates requirement for rod couplings
Hollo Set™ Drop-In Anchor — Zinc-Plated Carbon Steel
- Easy to install
- Offers consistent holding power
- Allows easy removability for service work
Hollo Set™ Drop-In Anchor — Type 304 Stainless Steel
- Easy to install
- Offers consistent holding power
- Allows easy removability for service work
Hollo Set™ Drop-In Anchor — Setting Tools
- Easy to install
- Offers consistent holding power
- Allows easy removability for service work
POWER-Drop™ Drop-In Anchor
- Internally threaded anchor
- Wedge performance with the convenience of drop-in
- Numerous head style options
Single Expansion Shield
- Holding power unaffected if bolt is removed and replaced
- Entire fastener is corrosion-resistant
- Allows easy removability for service work
Double Expansion Shield
- Expands fully to provide high gripping power
- Eliminates high stress points
- Allows easy removability for service work
Lag Screw Shield
- Ideal for concrete, masonry and mortar joints
- Zamac alloy finish is corrosion resistant
- Allows easy removability for service work
Machine Screw Shield — Zamac Alloy
- For use with a machine bolt in concrete, block, brick or stone
- Fits into irregular holes
- Setting tool provided in each box of anchors
Machine Screw Shield — Setting Tools
- For use with a machine bolt in concrete, block, brick or stone
- Fits into irregular holes
- Setting tool provided in each box of anchors
Strike-It™ Center Pin Drive Anchor
- Easy to install
- Depth of hole not critical
- Yellow dichromate finish is corrosion resistant
Screw-In™ Drive Screw Anchor
- Easy to install
- For use in concrete, block, brick or stone
- Pre-assembled, ready to use
Drive-It™ Drive Pin Anchor — Zinc-Plated Carbon Steel Pin
- Easy to install
- Ideal for light-duty and tamper-resistant applications
- Corrosion resistant zamac alloy body
Drive-It™ Drive Pin Anchor — Type 304 Stainless Steel Pin
- Easy to install
- Ideal for light-duty and tamper-resistant applications
- Corrosion resistant zamac alloy body
Slam-It™ Split Drive Anchor
- Easy to install
- For use in concrete and stone
- Tamper-proof
Pound-It™ Drive Anchor — Zinc-Plated Carbon Steel
- Easy to install
- Pre-formed one-piece design
- For use in concrete, grout-filled block, or masonry
Pound-It™ Drive Anchor — Type 316 Stainless Steel
- Easy to install
- Pre-formed one-piece design
- For use in concrete, grout-filled block, or masonry
Standard Toggle Bolt
- Easy snap-open action
- For use in wallboard/drywall
- Spreads load over a wide area
Self-Drilling Drywall Anchor — Nylon
- For wallboard and drywall 3/8” – 1”
SDS-plus® with Hex Shank Drill Bit
- Centering tip reduces bit walking
- Reduced friction during dust removal
- Decreased vibration back into the tool
Wej-Con® Concrete Screw Drill Bit
- Carbide-tipped drill bit for Wej-Con Screws
- Reduced vibration and noise
- Reduced breakage when encountering rebar
Spline Drill Bit
- Centering tip reduces bit walking
- Reduced friction during dust removal
- Decreased vibration back into the tool
SDS-plus® Premium Drill Bit — 2 Cutting Edges
- Centering tip reduces bit walking
- Reduced friction during dust removal
- Decreased vibration back into the tool
SDS-Max® Drill Bit — 6 Cutting Edge
- Carbide-tipped drill bit with 6 cutting edges
- Reduced vibration and noise
- Reduced breakage when encountering rebar
POWER-Sert™ Adhesive Insert Anchor — Zinc-Plated Carbon Steel
- Machine lathed from a single piece
- Exclusive FRICTION-FIT™ allows immediate fastening
- Easy installation
POWER-Sert™ Adhesive Insert Anchor — Type 304 Stainless Steel
- Machine lathed from a single piece
- Exclusive FRICTION-FIT™ allows immediate fastening
- Easy installation
POWER-Sert™ Adhesive Insert Anchor — Type 316 Stainless Steel
- Machine lathed from a single piece
- Exclusive FRICTION-FIT™ allows immediate fastening
- Easy installation
Inject-TITE™ (AW) All-Weather
- Bonds to smooth diamond core drilled holes
- For both solid and hollow base materials
- Styrene-free
Inject-TITE™ (FS) Fast-Set
- Won’t shrink or sag
- For both solid and hollow base materials
- Solvent-free, allowing for greater flexibility
Adhesive Dispensing Tools
- High-quality adhesive dispensing tools provide reliable and accurate functionality on the job site
- Color of dispensing tool subject to change
Epoxy Screen Tubes
- Epoxy screen tubes help shape and form epoxy in hollow materials.
Epoxy Mixing Nozzles
- Epoxy mixing nozzles unique design evenly mixes the 2-part epoxy
L-Bolt Anchors — Hot-Dip Galvanized
- Single-piece and easy to install in wet concrete
- Made with high-grade steel
- Nuts and washers are included
L-Bolt Anchors — Carbon Steel
- Single-piece and easy to install in wet concrete
- Made with high-grade steel
- Nuts and washers are included
Self-Drilling Drywall Anchor — Zamac Alloy
- For wallboard and drywall 3/8” – 1”
SNAPTOGGLE® Heavy-Duty Toggle Bolts — 304 Stainless Steel Channels
- Carry twice the load than standard wing anchors
- Smallest installation hole for each bolt size
- Provide superior holding with metal-to-metal fastening
SNAPTOGGLE® Heavy-Duty Toggle Bolts — Zinc-Plated Carbon Steel Channels
- Carry twice the load than standard wing anchors
- Smallest installation hole for each bolt size
- Provide superior holding with metal-to-metal fastening
SnapSkru® Self-Drilling Drywall Anchors
- Holds securely in walls & ceilings
- Unique locking action resists vibration and shock
- Strongest holding of all self-drilling drywall anchors
ALLIGATOR® All-Purpose Anchors
- Strongest in solid materials
- Holds securely even in hollow walls or ceilings
- Polypropylene body seals hole
TOGGLER® Plastic Toggle Anchors
- Use in almost any material
- 5/16” drill hole required for installation
- 159 lb max hold in 5/8” drywall
TOGGLER® Specialty Anchors — Pegboard Anchor
- Built-in spacer holds the pegboard the proper distance from the wall to allow peg hooks to work
- Eliminates need for furring strips, saving time and money
- Allows full use of the pegboard space
TOGGLER® Specialty Anchors — Picture Hook
- Hang paintings, prints, mirrors, etc. quickly, easily and securely
- Specially-designed, built-in hook holds the weight of the application on the screw, not below it
- Provides maximum holding and prevents pull-out
