SNAPTOGGLE BA / BB
Roll over image to zoom in
SNAPTOGGLE® Heavy-Duty Toggle Bolts
Zinc-Plated Carbon Steel Channels
SNAPTOGGLE heavy-duty toggle bolts carry twice the load in a smaller hole than standard wing anchors. A patented strap design with sturdier straps and smaller ratchet interval adjusts more precisely and snaps off flush to the surface.
SNAPTOGGLE heavy-duty toggle bolts do NOT spin when installed with a screw gun and provide superior holding with metal-to-metal fastening.
Find TOGGLERIn Store
Downloads / Tech Flyer
Materials / Finishes
- Channel: Yellow zinc-plated cold rolled steel or 304 stainless steel
- Metal Channel is RoHS-Compliant
- Straps and handle: High impact polystyrene
- Cap/Hat: Translucent polypropylene co-polymer
Features and Benefits
- Strong – up to 2x the load of an old-fashioned wing toggle
- Solid metal channel resists vibration and shock
- bolt is centered in channel and positioned for precise installation
- bolt threads never touch interior surface of hole and so can’t saw through substrate
- Save time – at least 6 minutes per anchor versus wing toggles
- Can use a screw gun – anchor does not spin
- Save money – turn a 2-person job into a 1-person job
- Use a shorter bolt – no need to carry a wing through the wall
- Patented strap design with sturdier straps and smaller
ratchet interval:- adjusts more precisely and snaps off flush to wall,
ceiling, or floor - does not break prematurely
- pushes aside insulation
- adjusts more precisely and snaps off flush to wall,
- Smallest installation hole for each bolt size:
- maintains integrity of wall, ceiling, or floor, strengthening
the anchoring - ends the need to patch an oversized hole [a 1/4" wing toggle requires a 3/4" diameter hole: 50% larger than the 1/2" diameter hole used by the 1/4” SNAPTOGGLE anchor]
- maintains integrity of wall, ceiling, or floor, strengthening
Installation
Part Numbers
Catalog No.
Style
Drill Dia.(in.)
Thread Size
Bolts Included*
Wall/Ceiling Thickness (in.)
Box/Bag (pcs. )
Master Carton (pcs.)
24013
BA
1/2
3/16-24
–
3/8 - 3-5/8
100
1000
24100
BA
1/2
3/16-24
Round Head
3/8 - 3-5/8
100
1000
24150
BA
1/2
3/16-24
Flat Head
3/8 - 3-5/8
100
1000
55150
BA
1/2
3/16-24
Round Head
3/8 - 3-5/8
30
150
25013
BA
1/2
3/16-24
–
3/8 - 3-5/8
50
500
50375
BA
1/2
3/16-24
Round Head
3/8 - 3-5/8
10
120
50350
BA
1/2
3/16-24
Round Head
3/8 - 3-5/8
2
200
24014
BB
1/2
1/4-20
–
3/8 - 3-5/8
100
1000
24200
BB
1/3
1/4-20
Round Head
3/8 - 3-5/8
100
500
24250
BB
1/2
1/4-20
Flat Head
3/8 - 3-5/8
100
500
55175
BB
1/2
1/4-20
Round Head
3/8 - 3-5/8
30
150
25014
BB
1/2
1/4-20
–
3/8 - 3-5/8
50
500
50425
BB
1/2
1/4-20
Round Head
3/8 - 3-5/8
10
120
50400
BB
1/2
1/4-20
Round Head
3/8 - 3-5/8
2
200
21017
BE
3/4
5/16-18
–
3/8 - 2-1/2
25
250
21015
BC
3/4
3/8-16
–
3/8 - 2-1/2
25
250
21016
BD
3/4
1/2-13
–
3/8 - 2-1/2
25
250
25029
BM5 Metric
1/2
M5 (5 mm)
–
3/8 - 3-5/8
50
500
25024
BM6 Metric
1/2
M6 (6 mm)
–
3/8 - 3-5/8
50
500
21031
BM8 Metric
3/4
M8 (8 mm)
–
3/8 - 2-1/2
25
250
21035
BM10 Metric
3/4
M10 (10 mm)
–
3/8 - 2-1/2
25
250
21049
BAL Long
1/2
3/16-24
–
3/8 - 9-1/2
50
500
21050
BBL Long
1/2
1/4-20
–
3/8 - 9-1/2
50
500
21064
BM5L Metric Long
1/2
M5 (5 mm)
–
3/8 - 9-1/2
50
500
21025
BM6L Metric Long
1/2
M6 (6 mm)
–
3/8 - 9-1/2
50
500
- Drill appropriate size hole. Hold metal channel flat alongside plastic straps & slide channel through the hole. Minimum clearance behind wall: only 1-7/8”
- Hold ends of straps together between thumb & forefinger and pull toward you until channel rests behind wall. Ratchet cap along straps with other hand until flange of cap is flush with wall.
- Place thumb between straps at wall. Push thumb side to side, snapping off straps level with flange of cap.
- Place item over flange. Insert bolt and tighten until snug against item, then stop. Use machine screw or bolt to match thread in metal channel.
