TOGGLER®

TOGGLER® Combo Kits

TOGGLER®

TOGGLER® Combo Kits

TOGGLER® 44-Piece Combo Anchor Kit

This anchor kit is the ideal solution for all your mounting, hanging, and decorating needs. It includes a variety of all our high-performance anchors. So, whether you’re a new mover, redecorating, mounting a new TV, hanging mirrors, or any other home improvement project, you’ll have the anchor you need to do the job right – quickly, safely, and easily.

Ideal to keep in your toolbox or workshop, the kit includes:
20 SnapSkru® anchors (standard and mini size)
10 Original TOGGLER® plastic anchors
4 SNAPTOGGLE® heavy-duty toggle bolts
10 ALLIGATOR® all-purpose anchors

View Technical Details
Materials/Finishes
  • SnapSkru®: Injection-molded glass filled nylon
  • TOGGLER®: Specially formulated non-corrodible polypropylene
  • ALLIGATOR®: Specially formulated, inert grade of self-lubricating, translucent, non-corrodible polypropylene
  • SNAPTOGGLE®: Channel: Yellow zinc-plated cold rolled steel or 304 stainless steel

Straps and Handle: High-impact polystyrene
Cap: Translucent polypropylene co-polymer

Features and Benefits
  • TOGGLER® 44 Piece High-Performance Combo Kit Contains
    • 10 SP. SnapSkru®. Self-Drilling Drywall Anchors
    • 10 SPM SnapSkru® MINI Self-Drilling Drywall Anchors
    • 10 TB. (3/8"-1/2") Plastic Toggle Anchors
    • 4 BA (3/16") SNAPTOGGLE®. Heavy-Duty Toggle Bolts
    • 10 AF6 (1/4") ALLIGATOR®. All-Purpose Anchors
  • TOGGLER® 50 Piece SnapSkru® Kit Contains
    • 25 SP SnapSkru® Self-Drilling Drywall Anchors
    • 25 SPM SnapSkru® MINI Self-Drilling Drywall Anchors

Compatible Surfaces:

Solid Masonry 

Hollow Masonry 

Drywall/Wallboard

Tile Over Drywall 

Stone Curtain Rods

Great for Hanging: 

Towel Hangers

Bathroom Fixtures

Surveillance Equipment

Safety Bars

Curtain Rods

Made in the USA, TOGGLER® High Performance Anchors Are the Right Choice For Every Mounting Project

Made in the USA, TOGGLER® High Performance Anchors Are the Right Choice For Every Mounting Project:

FAST, EASY INSTALLATION
WITH A MINIMUM OF TOOLS

REUSABLE WITHOUT LOSS
OF HOLDING POWER

QUALITY CONSTRUCTION
FOR GREATER RELIABILITY

SECURE HOLD WITH PATENTED,
PROVEN DESIGNS

ANCHORS FOR EVERY WALL SURFACE

HOLD EVERYTHING FROM
TVS TO MIRRORS AND MORE

SnapSkru®: 

    1. Press tip of SnapSkru® anchor into drywall using screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
    2. Place item over anchor and insert screw
    3. Tighten screw flush with item. The screw POPS open the anchor locking in on the wall and holding the gypsum board in compression. This reinforces the wall, increasing its holding power significantly.

TOGGLER®:

    1. Drill 5/16” diameter (Ø 8mm) hole. Fold anchor in the middle.
    2. Insert anchor in hole and tap flush with wall.
    3. Insert key to pop anchor open and lock behind hollow wall. Do not force key. Not necessary for thick or solid walls.
    4. Place item over anchor. Insert screw and tighten until screw is flush with fixture. 

ALLIGATOR®:

Solid Wall Installation

  1. Drill hole into wall the same diameter as anchor, at least 2x the length of the anchor. Push in anchor and tap flush to wall with a hammer.
  2. Place item over anchor, insert screw, and tighten flush with item. For best results, use a screw gun.

Hollow-Wall Installation

  1. Drill hole into wall the same diameter as anchor, at least 2x the length of the anchor. Push in anchor and tap flush to wall with a hammer.
  2. Place item over anchor. Insert screw and tighten flush with item.

Not recommended for hollow ceilings. Instead, use our TOGGLER® Plastic Anchor or our SNAPTOGGLE® Toggle Belt.  

SNAPTOGGLE®:

Solid Wall Installation

  1. Drill hole into wall the same diameter as anchor, at least 2x the length of the anchor. Push in anchor and tap flush to wall with a hammer.
  2. Place item over anchor, insert screw, and tighten flush with item. For best results, use a screw gun.

Hollow-Wall Installation

  1. Drill hole into wall the same diameter as anchor, at least 2x the length of the anchor. Push in anchor and tap flush to wall with a hammer.
  2. Place item over anchor. Insert screw and tighten flush with item.

Not recommended for hollow ceilings. Instead, use our TOGGLER® Plastic Anchor or our SNAPTOGGLE® Toggle Belt. 

Catalog No.DescriptionCarton Quantity
57100High-Performance Combo Kit. 44 Anchors & 44 Screws6
57125SnapSkru Kit. 25 SPM Mini and 25 SP Regular12
DIY

Ask The Experts